Drilling Drives and Anchor Drives
The Revolution Series Drives are designed to outfit several different types of equipment. This selection guide will assist you in selecting the right model for your equipment type.


Application |
Connection |
Excavator |
Model |
Drilling |
R-256 |
Skid Mount |
|
Drilling |
H-200 |
Skid Mount |
|
Drilling |
R-256 |
Skid Mount |
|
Drilling |
H-200 |
Skid Mount |
|
Drilling |
R-256 |
2T-3T |
|
Drilling |
H-200 |
2T-3T |
|
Drilling |
H-200 |
2T-4T |
|
Drilling |
H-250 |
5T-8T |
|
Drilling |
H-300 |
17T-25T |
|
Drilling |
H-300 |
20T-30T |
|
Drilling |
S-400 |
20T-30T |
|
Drilling |
S-130 |
20T-30T |
|
Anchor |
H-200 |
N/A |
|
Anchor |
H-200 |
5T-8T |
|
Anchor |
H-250 |
11T-17T |
|
Anchor |
H-250 |
8T-13T |
|
Anchor |
H-250 |
11T-17T |
|
Anchor |
H-300 |
20T-30T |
|
Anchor |
S-400 |
20T-30T |
|
Anchor |
S-130 |
20T-30T |
|
Anchor |
S-150 |
30T-40T |
|
Anchor |
S-177 |
60T-90T |
|
Anchor |
S-177 |
90T-150T |
|
Anchor |
S-200 |
90T-150T |
|
Features
- Large highly efficient gearboxes, designed specifically for long duty cycles.
- Standard cross-over pressure relief systems to protect the motor from pressure spikes.
- Two-piece bail housing design allows top section to be removed for easy motor access.
- Single and Two-speed models do not require drain lines.
- All models are designed to be outfitted with the TruLink torque monitoring system.
- All two-speed models are equipped with a pressure-activated auto shift feature.
- Accurate torque and speed specifications. The manufacturer ensures that all torque and speed specifications have maximum efficiencies applied to provide the most accurate specifications possible. None of the specifications are listed at 100% theoretical values.
Complete Drive Package Includes
- Mounting Brackets for Skid Loaders, Backhoe Loaders, Excavators (Compact and Large).
- Anchor drive tool adapters.
- RevTrak digital torque monitoring system.
Applications
- Anchoring: The RS, RT, and RV models are designed specifically for the anchor installation industry. The high torque and slow speed configuration is ideal for anchor applications.
- Drilling: The DS, DT, and DV series are ideal for various types of drilling applications. Torque ranges from 2,500 ft/lb to 40,000 ft/lb.
|


|

Features
- Compact Size
- Universal Compact Skid Mount included
- Hydraulic Hoses included
Accessories
- Double Swivel Bracket Assembly
- Pin Assembly 7/8"
|
MS-100 / Single Speed |
Model |
Connection |
Swivel Type |
MS-100 |
R-256 |
Single |
MS-100 |
R-256 |
Double |
MS-100 |
H-200 |
Single |
MS-100 |
H-200 |
Double |
|
Total Unit Weight |
146 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure (psi) |
Torque (ft/lbs) |
Displacement |
6.1 cu/in |
1600 |
613 |
Motor Type |
Single Speed Bi-Directional |
1800 |
689 |
Motor Output Shaft |
7/8" Spline 14T |
2000 |
766 |
Motor Mount |
SAE - A 2 Bolt |
2200 |
842 |
Motor Ports |
1/2" BSP |
2400 |
919 |
Cross-Over Pressure Relief |
Not Equipped |
2600 |
995 |
Planetary Gearbox Information |
2800 |
1073 |
Gearbox Type |
Planetary Single Stage |
3000 |
1149 |
Reduction Ratio |
5.77:1 |
|
Output Shaft |
2" Hex or 2 9/16" Round |
Reference Speed Chart |
Oil Capacity |
.31 Gallons |
Flow (gpm) |
Speed (rpm) |
Oil Type |
SAE 80W90 GL-5 |
10 |
54 |
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
15 |
80 |
20 |
108 |
25 |
134 |
Manufacturer's Efficiency Statement

Features
- Compact Size
- Universal Compact Skid Mount included
- Hydraulic Hoses included
Accessories
- Double Swivel Bracket Assembly
- Pin Assembly 7/8"
|
MS-125 / Single Speed |
Model |
Connection |
Swivel Type |
MS-125 |
R-256 |
Single |
MS-125 |
R-256 |
Double |
MS-125 |
H-200 |
Single |
MS-125 |
H-200 |
Double |
|
Total Unit Weight |
146 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure (psi) |
Torque (ft/lbs) |
Displacement |
7.3 cu/in |
1600 |
736 |
Motor Type |
Single Speed Bi-Directional |
1800 |
827 |
Motor Output Shaft |
7/8" Spline 14T |
2000 |
919 |
Motor Mount |
SAE - A 2 Bolt |
2200 |
1011 |
Motor Ports |
7/8" 14 O-Ring |
2400 |
1103 |
Cross-Over Pressure Relief |
Not Equipped |
2600 |
1195 |
Planetary Gearbox Information |
2800 |
1287 |
Gearbox Type |
Planetary Single Stage |
3000 |
1378 |
Reduction Ratio |
5.77:1 |
|
Output Shaft |
2" Hex or 2 9/16" Round |
Reference Speed Chart |
Oil Capacity |
.31 Gallons |
Flow (gpm) |
Speed (rpm) |
Oil Type |
SAE 80W90 GL-5 |
10 |
45 |
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
15 |
67 |
20 |
90 |
25 |
112 |
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Drilling |
H-200 |
2T-3T |
Drilling |
R-256 |
2T-3T |
Accessories
- Universal Mounting Plate for Skid-Skeer
- Long Reach Universal Mount for Skid-Skeer
- TruLink Class 1 4" Monitor
- TruLink Class 1 8" Monitor
- Link Arm 45mm
- Pin Assembly 45mm
|
|
DS-2 / Single Speed - Specifications
Total Unit Weight |
115 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure (psi) |
Torque (ft/lbs) |
Displacement |
12.5 cu/in |
1600 |
1256 |
Motor Type |
Single Speed Bi-Directional |
1800 |
1413 |
Motor Output Shaft |
7/8" Spline 14T |
2000 |
1570 |
Motor Mount |
SAE - A 2 Bolt |
2200 |
1728 |
Motor Ports |
1/2" BSP |
2400 |
1884 |
Cross-Over Pressure Relief |
Not Equipped |
2600 |
2042 |
Planetary Gearbox Information |
2800 |
2198 |
Gearbox Type |
Planetary Single Stage |
3000 |
2356 |
Reduction Ratio |
5.77:1 |
|
Output Shaft |
2" Hex or 2 9/16" Round |
Reference Speed Chart |
Oil Capacity |
.31 Gallons |
Flow (gpm) |
Speed (rpm) |
Oil Type |
SAE 80W90 GL-5 |
10 |
26 |
Shaft Pull Out (lbs.) |
3,000 lbs. |
15 |
39 |
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
20 |
52 |
25 |
66 |
|
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Drilling |
H-200 |
2T-4T |
Accessories
- Universal Mounting Plate for Skid-Skeer
- Long Reach Universal Mount for Skid-Skeer
- TruLink Class 1 4" Monitor
- TruLink Class 1 8" Monitor
- Link Arm 45mm
- Pin Assembly 45mm
|
|
DS-3 / Single Speed - Specifications
Total Unit Weight |
170 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure (psi) |
Torque (ft/lbs) |
Displacement |
8.0 cu/in |
1600 |
2058 |
Motor Type |
Single Speed Bi-Directional |
1800 |
2315 |
Motor Output Shaft |
1" 6B Spline |
2000 |
2572 |
Motor Mount |
SAE - A 2 Bolt |
2200 |
2830 |
Motor Ports |
7/8" - 14 O-Ring |
2400 |
3087 |
Cross-Over Pressure Relief |
Not Equipped |
2600 |
3344 |
Planetary Gearbox Information |
2800 |
3601 |
Gearbox Type |
Planetary Two Stage |
3000 |
3859 |
Reduction Ratio |
14.79:1 |
|
Output Shaft |
2" Hex |
Reference Speed Chart |
Oil Capacity |
.87 Gallons |
Flow (gpm) |
Speed (rpm) |
Oil Type |
SAE 80W90 GL-5 |
10 |
16 |
Shaft Pull Out (lbs.) |
7,000 lbs. |
15 |
24 |
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
20 |
32 |
25 |
40 |
|
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Drilling |
H-250 |
5T-8T |
Accessories
- Universal Mounting Plate for Skid-Skeer
- Long Reach Universal Mount for Skid-Skeer
- TruLink Class 1 4" Monitor
- TruLink Class 1 8" Monitor
- Link Arm 45mm
- Pin Assembly 45mm
|
|
DT-5 / Two Speed - Specifications
Total Unit Weight |
645 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure (psi) |
High Torque (ft/lbs) |
Low Torque (ft/lbs) |
Displacement |
2.98 cu/in |
Motor Type |
Two Speed Bi-Directional |
1600 |
2629 |
1314 |
Motor Output Shaft |
1 1/4" Spline 14T |
1800 |
2958 |
1478 |
Motor Mount |
SAE - C 4 Bolt |
2000 |
3287 |
1643 |
Motor Ports |
1 5/8" - 12 UN-2B |
2200 |
3615 |
1807 |
Cross-Over Pressure Relief |
Set @ 3100 psi |
2400 |
3943 |
1971 |
Planetary Gearbox Information |
2600 |
4272 |
2136 |
Gearbox Type |
Planetary Two Stage |
2800 |
4601 |
2300 |
Reduction Ratio |
25.36:1 |
3000 |
4930 |
2465 |
Output Shaft |
2 1/2" Hex |
Reference Speed Chart |
Oil Capacity |
1.7 Gallons |
Flow (gpm) |
Low Speed (rpm) |
High Speed (rpm) |
Oil Type |
SAE 80W90 GL-5 |
Shaft Pull Out (lbs.) |
22,500 lbs. |
20 |
25 |
50 |
2 SPEED MODELS MUST HAVE A MINIMUM OF 20GPM.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
25 |
31 |
63 |
30 |
38 |
75 |
35 |
44 |
88 |
40 |
50 |
100 |
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Drilling |
H-300 |
17T-25T |
Accessories
- TruLink Class 1 4" Monitor
- TruLink Class 1 8" Monitor
- Link Arm 45mm
- Pin Assembly 45mm
|
|
DT-15 / Two Speed - Specifications
Total Unit Weight |
825 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure
(psi) |
High Torque
(ft/lbs) |
Low Torque
(ft/lbs) |
Displacement |
17.8 cu/in |
Motor Type |
Two Speed Bi-Directional |
1600 |
8254 |
4127 |
Motor Output Shaft |
1 1/4" Spline 14T |
1800 |
9287 |
4643 |
Motor Mount |
SAE - C 4 Bolt |
2000 |
10,318 |
5159 |
Motor Ports |
1 5/8" - 12 UN-2B |
2200 |
11,350 |
5674 |
Cross-Over Pressure Relief |
Set @ 3100 psi |
2400 |
12,382 |
6191 |
Planetary Gearbox Information |
2600 |
13,414 |
6707 |
Gearbox Type |
Planetary Two Stage |
2800 |
14,445 |
7223 |
Reduction Ratio |
26.52:1 |
3000 |
15,478 |
7738 |
Output Shaft |
3" Hex |
|
Oil Capacity |
2.4 Gallons |
Reference Speed Chart |
Oil Type |
SAE 80W90 GL-5 |
Flow
(gpm) |
Low Speed
(rpm) |
High Speed
(rpm) |
Shaft Pull Out (lbs.) |
22,500 lbs. |
2 SPEED MODELS MUST HAVE A MINIMUM OF 20GPM.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
20 |
8 |
16 |
30 |
12 |
24 |
40 |
16 |
32 |
50 |
20 |
40 |
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Drilling |
H-300 |
20T-30T |
Accessories
- TruLink Class 1 4" Monitor
- TruLink Class 1 8" Monitor
- Link Arm 45mm
- Pin Assembly 45mm
|
|
DV-20 / Variable Speed - Specifications
Total Unit Weight |
880 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure
(psi) |
High Torque
(ft/lbs) |
Low Torque
(ft/lbs) |
Displacement |
8.25 cu/in |
Motor Type |
Var. Speed Bi-Directional |
2600 |
14,629 |
8669 |
Motor Output Shaft |
8/16 Spline 13T |
2800 |
15,755 |
9336 |
Motor Mount |
SAE - D 2 Bolt |
3000 |
16,880 |
10,003 |
Motor Ports |
Radial (Quick Coupler) |
3200 |
18,006 |
10,670 |
Cross-Over Pressure Relief |
None |
3400 |
19,131 |
11,336 |
Planetary Gearbox Information |
3600 |
20,256 |
12,004 |
Gearbox Type |
Planetary Three Stage |
3800 |
21,382 |
12,671 |
Reduction Ratio |
60.56:1 |
4000 |
22,507 |
13,337 |
Output Shaft |
3" Hex |
Reference Speed Chart |
Oil Capacity |
2.6 Gallons |
Flow
(gpm)
|
Low Speed
(rpm)
|
High Speed
(rpm)
|
Oil Type |
SAE 80W90 GL-5 |
Shaft Pull Out (lbs.) |
45,000 lbs. |
40 |
16 |
27 |
VARIABLE SPEED MODELS MUST HAVE A DRAIN LINE.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
45 |
18 |
30 |
50 |
20 |
33 |
55 |
22 |
37 |
60 |
24 |
40 |
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Drilling |
S-400 |
20T-30T |
Accessories
- TruLink Class 1 4" Monitor
- TruLink Class 1 8" Monitor
- Link Arm 75mm
- Pin Assembly 75mm
|
|
DV-30 / Variable Speed - Specifications
Total Unit Weight |
1250 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure
(psi) |
High Torque
(ft/lbs) |
Low Torque
(ft/lbs) |
Displacement |
10.06 cu/in |
Motor Type |
Var. Speed Bi-Directional |
2600 |
20,579 |
8481 |
Motor Output Shaft |
1 1/4" Spline 13T |
2800 |
22,162 |
9133 |
Motor Mount |
SAE - D 2 Bolt |
3000 |
23,746 |
9786 |
Motor Ports |
Radial (Quick Coupler) |
3200 |
25,328 |
10,438 |
Cross-Over Pressure Relief |
None |
3400 |
26,912 |
11,091 |
Planetary Gearbox Information |
3600 |
28,495 |
11,743 |
Gearbox Type |
Planetary Three Stage |
3800 |
30,078 |
12,396 |
Reduction Ratio |
69.7:1 |
4000 |
31,661 |
13,048 |
Output Shaft |
4" Square |
Reference Speed Chart |
Oil Capacity |
3.1 Gallons |
Flow
(gpm)
|
Low Speed
(rpm)
|
High Speed
(rpm)
|
Oil Type |
SAE 80W90 GL-5 |
Shaft Pull Out (lbs.) |
60,000 lbs. |
40 |
11 |
27 |
VARIABLE SPEED MODELS MUST HAVE A DRAIN LINE.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
45 |
13 |
31 |
50 |
14 |
34 |
55 |
15 |
37 |
60 |
17 |
41 |
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Drilling |
S-130 |
20T-30T |
Accessories
- TruLink Class 2 4" Monitor
- TruLink Class 2 8" Monitor
- Link Arm 75mm
|
|
DV-40 / Variable Speed - Specifications
Total Unit Weight |
1500 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure
(psi) |
High Torque
(ft/lbs) |
Low Torque
(ft/lbs) |
Displacement |
10.06 cu/in |
Motor Type |
Var. Speed Bi-Directional |
2600 |
24,737 |
10,194 |
Motor Output Shaft |
1 1/4" Spline 13T |
2800 |
26,640 |
10,979 |
Motor Mount |
SAE - D 2 Bolt |
3000 |
28,542 |
11,762 |
Motor Ports |
Radial (Quick Coupler) |
3200 |
30,445 |
12,547 |
Cross-Over Pressure Relief |
None |
3400 |
32,348 |
13,331 |
Planetary Gearbox Information |
3600 |
34,251 |
14,115 |
Gearbox Type |
Planetary Three Stage |
3800 |
36,154 |
14,900 |
Reduction Ratio |
83.78:1 |
4000 |
38,056 |
15,683 |
Output Shaft |
130mm Square |
Reference Speed Chart |
Oil Capacity |
3.7 Gallons |
Flow
(gpm)
|
Low Speed
(rpm)
|
High Speed
(rpm)
|
Oil Type |
SAE 80W90 GL-5 |
Shaft Pull Out (lbs.) |
60,000 lbs. |
40 |
9 |
23 |
VARIABLE SPEED MODELS MUST HAVE A DRAIN LINE.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
45 |
10 |
25 |
50 |
12 |
28 |
55 |
13 |
31 |
60 |
14 |
34 |
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Anchor |
H-200 |
N/A |
Accessories
- Bail Assembly Kit (convert to RS-7)
|
|
RS-7X / Single Speed - Specifications
Total Unit Weight |
120 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure (psi) |
Torque (ft/lbs) |
Displacement |
18.7 cu/in |
1000 |
3004 |
Motor Type |
Single Speed |
1300 |
3906 |
Motor Output Shaft |
1" 6B Spline |
1500 |
4507 |
Motor Mount |
SAE - A 2 Bolt |
1700 |
5108 |
Motor Ports |
3/4" - 16 O-Ring |
1900 |
5709 |
Cross-Over Pressure Relief |
Set @ 2700 psi |
2100 |
6310 |
Planetary Gearbox Information |
2300 |
6911 |
Gearbox Type |
Planetary Two Stage |
2500 |
7512 |
Reduction Ratio |
14.79:1 |
|
Output Shaft |
2" Hex |
Reference Speed Chart |
Oil Capacity |
.87 Gallons |
Flow (gpm) |
Speed (rpm) |
Oil Type |
SAE 80W90 GL-5 |
10 |
7 |
Shaft Pull Out (lbs.) |
7,000 lbs. |
15 |
10 |
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
20 |
14 |
25 |
17 |
|
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Anchor |
H-200 |
5T-8T |
Accessories
- Universal Mounting Plate for Skid-Skeer
- Long Reach Universal Mount for Skid-Skeer
- TruLink Class 1 4" Monitor
- TruLink Class 1 8" Monitor
- Link Arm 45mm
- Pin Assembly 45mm
|
|
RS-7 / Single Speed - Specifications
Total Unit Weight |
170 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure (psi) |
Torque (ft/lbs) |
Displacement |
18.7 cu/in |
1000 |
3004 |
Motor Type |
Single Speed |
1300 |
3906 |
Motor Output Shaft |
1" 6B Spline |
1500 |
4507 |
Motor Mount |
SAE - A 2 Bolt |
1700 |
5108 |
Motor Ports |
3/4" - 16 O-Ring |
1900 |
5709 |
Cross-Over Pressure Relief |
Set @ 2700 psi |
2100 |
6310 |
Planetary Gearbox Information |
2300 |
6911 |
Gearbox Type |
Planetary Two Stage |
2500 |
7512 |
Reduction Ratio |
14.79:1 |
|
Output Shaft |
2" Hex |
Reference Speed Chart |
Oil Capacity |
.87 Gallons |
Flow (gpm) |
Speed (rpm) |
Oil Type |
SAE 80W90 GL-5 |
10 |
7 |
Shaft Pull Out (lbs.) |
7,000 lbs. |
15 |
10 |
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
20 |
14 |
25 |
17 |
|
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Anchor |
H-250 |
11T-17T |
Accessories
- Universal Mounting Plate for Skid-Skeer
- Long Reach Universal Mount for Skid-Skeer
- TruLink Class 1 4" Monitor
- TruLink Class 1 8" Monitor
- Link Arm 45mm
- Pin Assembly 45mm
|
|
RS-12 / Single Speed - Specifications
Total Unit Weight |
546 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure (psi) |
Torque (ft/lbs) |
Displacement |
23.9 cu/in |
1600 |
6941 |
Motor Type |
Single Speed Bi-Directional |
1800 |
7808 |
Motor Output Shaft |
1 1/2" Spline 17T |
2000 |
8677 |
Motor Mount |
SAE - C 4 Bolt |
2200 |
9544 |
Motor Ports |
1 1/16" 12 O-Ring |
2400 |
10,411 |
Cross-Over Pressure Relief |
Set @ 3100 psi |
2600 |
11,280 |
Planetary Gearbox Information |
2800 |
12,147 |
Gearbox Type |
Planetary Two Stage |
3000 |
13,014 |
Reduction Ratio |
17.39:1 |
Reference Speed Chart
|
Output Shaft |
2 1/2" Hex |
Flow (gpm) |
Speed (rpm) |
Oil Capacity |
1.7 Gallons |
15 |
7 |
Oil Type |
SAE 80W90 GL-5 |
20 |
9 |
Shaft Pull Out (lbs.) |
22,500 lbs. |
25 |
11 |
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
30 |
13 |
35 |
15 |
40 |
18 |
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Anchor |
H-250 |
8T-13T |
Accessories
- Universal Mounting Plate for Skid-Skeer
- Long Reach Universal Mount for Skid-Skeer
- TruLink Class 1 4" Monitor
- TruLink Class 1 8" Monitor
- Link Arm 45mm
- Pin Assembly 45mm
|
|
RT-9 / Two Speed - Specifications
Total Unit Weight |
540 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure
(psi) |
High Torque
(ft/lbs) |
Low Torque
(ft/lbs) |
Displacement |
11.9 cu/in |
Motor Type |
Two Speed Bi-Directional |
1600 |
5253 |
2626 |
Motor Output Shaft |
1 1/4" Spline 14T |
1800 |
5910 |
2954 |
Motor Mount |
SAE - C 4 Bolt |
2000 |
6567 |
3283 |
Motor Ports |
1 5/8" - 12 UN-2B |
2200 |
7223 |
3611 |
Cross-Over Pressure Relief |
Set @ 3100 psi |
2400 |
7880 |
3940 |
Planetary Gearbox Information |
2600 |
8536 |
4268 |
Gearbox Type |
Planetary Two Stage |
2800 |
9193 |
4596 |
Reduction Ratio |
25.36:1 |
3000 |
9850 |
4925 |
Output Shaft |
2 1/2" Hex |
|
Oil Capacity |
1.7 Gallons |
Reference Speed Chart |
Oil Type |
SAE 80W90 GL-5 |
Flow
(gpm)
|
Low Speed
(rpm)
|
High Speed
(rpm)
|
Shaft Pull Out (lbs.) |
22,500 lbs. |
2 SPEED MODELS MUST HAVE A MINIMUM OF 20GPM.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
20 |
13 |
25 |
30 |
19 |
38 |
40 |
25 |
50 |
50 |
31 |
63 |
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Anchor |
H-250 |
11T-17T |
Accessories
- Universal Mounting Plate for Skid-Skeer
- Long Reach Universal Mount for Skid-Skeer
- TruLink Class 1 4" Monitor
- TruLink Class 1 8" Monitor
- Link Arm 45mm
- Pin Assembly 45mm
|
|
RT-12 / Two Speed - Specifications
Total Unit Weight |
655 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure
(psi) |
High Torque
(ft/lbs) |
Low Torque
(ft/lbs) |
Displacement |
14.9 cu/in |
Motor Type |
Two Speed Bi-Directional |
1600 |
6576 |
3068 |
Motor Output Shaft |
1 1/4" Spline 14T |
1800 |
7398 |
3451 |
Motor Mount |
SAE - C 4 Bolt |
2000 |
8220 |
3835 |
Motor Ports |
1 5/8" - 12 UN-2B |
2200 |
9042 |
4219 |
Cross-Over Pressure Relief |
Set @ 3100 psi |
2400 |
9864 |
4603 |
Planetary Gearbox Information |
2600 |
10,686 |
4986 |
Gearbox Type |
Planetary Two Stage |
2800 |
11,508 |
5369 |
Reduction Ratio |
25.36:1 |
3000 |
12,330 |
5753 |
Output Shaft |
2 1/2" Hex |
|
Oil Capacity |
1.8 Gallons |
Reference Speed Chart |
Oil Type |
SAE 80W90 GL-5 |
Flow
(gpm)
|
Low Speed
(rpm)
|
High Speed
(rpm)
|
Shaft Pull Out (lbs.) |
22,500 lbs. |
2 SPEED MODELS MUST HAVE A MINIMUM OF 20GPM. NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
20 |
10 |
21 |
30 |
15 |
32 |
40 |
20 |
43 |
50 |
25 |
54 |
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Anchor |
H-300 |
20T-30T |
Accessories
- TruLink Class 1 4" Monitor
- TruLink Class 1 8" Monitor
- Link Arm 45mm
- Pin Assembly 45mm
|
|
RT-20 / Two Speed - Specifications
Total Unit Weight |
855 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure
(psi) |
High Torque
(ft/lbs) |
Low Torque
(ft/lbs) |
Displacement |
11.9 cu/in |
Motor Type |
Two Speed Bi-Directional |
1600 |
12,086 |
6043 |
Motor Output Shaft |
1 1/4" Spline 14T |
1800 |
13,597 |
6798 |
Motor Mount |
SAE - C 4 Bolt |
2000 |
15,108 |
7554 |
Motor Ports |
1 5/8" - 12 UN-2B |
2200 |
16,618 |
8309 |
Cross-Over Pressure Relief |
Set @ 3100 psi |
2400 |
18,129 |
9064 |
Planetary Gearbox Information |
2600 |
19,640 |
9820 |
Gearbox Type |
Planetary Three Stage |
2800 |
21,151 |
10,575 |
Reduction Ratio |
60.56:1 |
3000 |
22,662 |
11,331 |
Output Shaft |
3" Hex |
|
Oil Capacity |
2.6 Gallons |
Reference Speed Chart |
Oil Type |
SAE 80W90 GL-5 |
Flow
(gpm)
|
Low Speed
(rpm)
|
High Speed
(rpm)
|
Shaft Pull Out (lbs.) |
45,000 lbs. |
2 SPEED MODELS MUST HAVE A MINIMUM OF 20GPM. NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
20 |
5 |
10 |
30 |
8 |
15 |
40 |
10 |
20 |
50 |
13 |
25 |
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Anchor |
S-400 |
20T-30T |
Accessories
- TruLink Class 2 4" Monitor
- TruLink Class 2 8" Monitor
- Link Arm 75mm
- Pin Assembly 75mm
|
|
RT-30 / Two Speed - Specifications
Total Unit Weight |
1220 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure
(psi) |
High Torque
(ft/lbs) |
Low Torque
(ft/lbs) |
Displacement |
13.9 cu/in |
Motor Type |
Two Speed Bi-Directional |
1600 |
16,250 |
8125 |
Motor Output Shaft |
1 1/4" Spline 14T |
1800 |
18,281 |
9140 |
Motor Mount |
SAE - C 4 Bolt |
2000 |
20,312 |
10,156 |
Motor Ports |
1 5/8" - 12 UN-2B |
2200 |
22,344 |
11,171 |
Cross-Over Pressure Relief |
Set @ 3100 psi |
2400 |
24,375 |
12,187 |
Planetary Gearbox Information |
2600 |
26,407 |
13,203 |
Gearbox Type |
Planetary Three Stage |
2800 |
28,438 |
14,218 |
Reduction Ratio |
69.7:1 |
3000 |
30,470 |
15,234 |
Output Shaft |
4" Square |
|
Oil Capacity |
3.1 Gallons |
Reference Speed Chart |
Oil Type |
SAE 80W90 GL-5 |
Flow
(gpm)
|
Low Speed
(rpm)
|
High Speed
(rpm)
|
Shaft Pull Out (lbs.) |
60,000 lbs. |
2 SPEED MODELS MUST HAVE A MINIMUM OF 20GPM. NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
20 |
4 |
8 |
30 |
6 |
11 |
40 |
8 |
15 |
50 |
9 |
19 |
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Anchor |
S-300 |
20T-30T |
Accessories
- TruLink Class 2 4" Monitor
- TruLink Class 2 8" Monitor
- Link Arm 75mm
- Pin Assembly 75mm
|
|
RT-40 / Two Speed - Specifications
Total Unit Weight |
1440 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure
(psi) |
High Torque
(ft/lbs) |
Low Torque
(ft/lbs) |
Displacement |
13.9 cu/in |
Motor Type |
Two Speed Bi-Directional |
1600 |
21,074 |
10,537 |
Motor Output Shaft |
1 1/4" Spline 14T |
1800 |
23,708 |
11,854 |
Motor Mount |
SAE - C 4 Bolt |
2000 |
26,343 |
13,171 |
Motor Ports |
1 5/8" - 12 UN-2B |
2200 |
28,976 |
14,488 |
Cross-Over Pressure Relief |
Set @ 3100 psi |
2400 |
31,611 |
15,806 |
Planetary Gearbox Information |
2600 |
34,245 |
17,122 |
Gearbox Type |
Planetary Three Stage |
2800 |
36,880 |
18,439 |
Reduction Ratio |
90.39:1 |
3000 |
39,514 |
19,757 |
Output Shaft |
130mm Square |
|
Oil Capacity |
3.7 Gallons |
Reference Speed Chart |
Oil Type |
SAE 80W90 GL-5 |
Flow
(gpm)
|
Low Speed
(rpm)
|
High Speed
(rpm)
|
Shaft Pull Out (lbs.) |
60,000 lbs. |
2 SPEED MODELS MUST HAVE A MINIMUM OF 20GPM. NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
20 |
3 |
6 |
30 |
4 |
9 |
40 |
6 |
12 |
50 |
7 |
15 |
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Anchor |
S-150 |
30T-40T |
Accessories
- TruLink Class 2 4" Monitor
- TruLink Class 2 8" Monitor
- TruLink Class 3 8" Monitor (3.967" pin)
- Link Arm 75mm
- Pin Assembly 75mm
|
|
RV-70 / Two Speed - Specifications
Total Unit Weight |
2850 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure
(psi) |
High Torque
(ft/lbs) |
Low Torque
(ft/lbs) |
Displacement |
13.73 cu/in |
Motor Type |
Var. Speed Bi-Directional |
2800 |
55,301 |
27,638 |
Motor Output Shaft |
13T 8/16 DP Spline |
2900 |
57,276 |
28,625 |
Motor Mount |
SAE - D 4 Bolt |
3000 |
59,251 |
29,612 |
Motor Ports |
Code 62 SAE Split Flange |
3100 |
61,226 |
30,599 |
Cross-Over Pressure Relief |
Not Equipped |
3200 |
63,201 |
31,586 |
Planetary Gearbox Information |
3300 |
65176 |
32,573 |
Gearbox Type |
Planetary Three Stage |
3400 |
67,151 |
33,560 |
Reduction Ratio |
126:1 |
3500 |
69,126 |
34,547 |
Output Shaft |
150mm Square |
Reference Speed Chart |
Oil Capacity |
9.2 Gallons |
Flow
(gpm)
|
Low Speed
(rpm)
|
High Speed
(rpm)
|
Oil Type |
SAE 80W90 GL-5 |
Shaft Pull Out (lbs.) |
100,000 lbs. |
70 |
8 |
16 |
VARIABLE SPEED MODELS MUST HAVE A DRAIN LINE.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
90 |
10 |
21 |
110 |
12 |
24 |
130 |
14 |
29 |
150 |
17 |
33 |
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Anchor |
S-177 |
60T-90T |
Accessories
- TruLink Class 3 8" Monitor
|
|
RV-100 / Variable Speed - Specifications
Total Unit Weight |
3800 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure
(psi) |
High Torque
(ft/lbs) |
Low Torque
(ft/lbs) |
Displacement |
13.73 cu/in |
Motor Type |
Var. Speed Bi-Directional |
2800 |
88,334 |
44,167 |
Motor Output Shaft |
13T 8/16 DP Spline |
2900 |
91,489 |
45,744 |
Motor Mount |
SAE - D 4 Bolt |
3000 |
94,644 |
47,322 |
Motor Ports |
Code 62 SAE Split Flange |
3100 |
97,799 |
48,899 |
Cross-Over Pressure Relief |
Not Equipped |
3200 |
100,954 |
50,477 |
Planetary Gearbox Information |
3300 |
104,108 |
52,054 |
Gearbox Type |
Planetary Four Stage |
3400 |
107,263 |
53,631 |
Reduction Ratio |
208.54:1 |
3500 |
110,418 |
55,209 |
Output Shaft |
177mm Square |
Reference Speed Chart |
Oil Capacity |
11.0 Gallons |
Flow
(gpm)
|
Low Speed
(rpm)
|
High Speed
(rpm)
|
Oil Type |
SAE 80W90 GL-5 |
Shaft Pull Out (lbs.) |
180,000 lbs. |
70 |
5 |
9 |
VARIABLE SPEED MODELS MUST HAVE A DRAIN LINE.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
90 |
6 |
12 |
110 |
7 |
15 |
130 |
9 |
17 |
150 |
10 |
20 |
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Anchor |
S-177 |
90T-150T |
Accessories
- TruLink Class 4 8" Monitor
|
|
RV-140 / Variable Speed - Specifications
Total Unit Weight |
4000 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure
(psi) |
High Torque
(ft/lbs) |
Low Torque
(ft/lbs) |
Displacement |
13.73 cu/in |
Motor Type |
Var. Speed Bi-Directional |
2800 |
112,521 |
56,260 |
Motor Output Shaft |
13T 8/16 DP Spline |
2900 |
116,540 |
58,270 |
Motor Mount |
SAE - D 4 Bolt |
3000 |
120,559 |
60,279 |
Motor Ports |
Code 62 SAE Split Flange |
3100 |
124,577 |
62,288 |
Cross-Over Pressure Relief |
Not Equipped |
3200 |
128,596 |
64,298 |
Planetary Gearbox Information |
3300 |
132,614 |
66,307 |
Gearbox Type |
Planetary Four Stage |
3400 |
136,633 |
68,316 |
Reduction Ratio |
265.64:1 |
3500 |
140,652 |
70,326 |
Output Shaft |
177mm Square |
|
Oil Capacity |
11.0 Gallons |
Reference Speed Chart |
Oil Type |
SAE 80W90 GL-5 |
Flow
(gpm)
|
Low Speed
(rpm)
|
High Speed
(rpm)
|
Shaft Pull Out (lbs.) |
250,000 lbs. |
VARIABLE SPEED MODELS MUST HAVE A DRAIN LINE.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
70
|
4 |
7 |
90 |
5 |
9 |
110 |
6 |
12 |
130 |
7 |
14 |
150 |
8 |
16 |
Manufacturer's Efficiency Statement
Application |
Connection |
Excavator |
|
Anchor |
S-200 |
90T-150T |
Accessories
- TruLink Class 4 8" Monitor
|
|
RV-200 / Variable Speed - Specifications
Total Unit Weight |
5000 lbs. |
|
Reference Torque Chart |
Hydraulic Motor Information |
Pressure
(psi) |
High Torque
(ft/lbs) |
Low Torque
(ft/lbs) |
Displacement |
13.73 cu/in |
Motor Type |
Var. Speed Bi-Directional |
2800 |
169,434 |
84,717 |
Motor Output Shaft |
13T 8/16 DP Spline |
2900 |
175,486 |
87,743 |
Motor Mount |
SAE - D 4 Bolt |
3000 |
181,537 |
90,768 |
Motor Ports |
Code 62 SAE Split Flange |
3100 |
187,588 |
93,794 |
Cross-Over Pressure Relief |
Not Equipped |
3200 |
193,639 |
96,819 |
Planetary Gearbox Information |
3300 |
199,691 |
99,845 |
Gearbox Type |
Planetary Four Stage |
3400 |
205,742 |
102,871 |
Reduction Ratio |
400:1 |
3500 |
211,793 |
105,896 |
Output Shaft |
200mm Square |
Reference Speed Chart |
Oil Capacity |
16.25 Gallons |
Flow
(gpm)
|
Low Speed
(rpm)
|
High Speed
(rpm)
|
Oil Type |
SAE 80W90 GL-5 |
Shaft Pull Out (lbs.) |
300,000 lbs. |
70
|
2 |
5 |
VARIABLE SPEED MODELS MUST HAVE A DRAIN LINE.
NOTE: Revolution Drive units are not recommended for DTH and will not be covered under warranty for damage due to down-the-hole drilling. |
90 |
3 |
6 |
110 |
4 |
8 |
130 |
5 |
9 |
150 |
5 |
10 |
Manufacturer's Efficiency Statement
Accessories - Link Arm, Link Pin, and Flange Adapter
Accessories - Link Arms and Pins
- Link Arm 45mm (shown)
- Link Arm 75mm
- Pin Arm Assembly 45mm (shown)
- Pin 75mm
|
|
Accessories - Flange Adapters
- H-250 Hex Flange Adapter
- H-300 Hex Flange Adapter
- S-400 Hex Flange Adapter
|
Accessories - Drive Tools |
|
Accessories - Drive Tools |
Drive |
Shaft |
Drive |
Shaft |
DS-2 |
2" Hex |
RT-12 |
2 1/2" Hex |
DS-3 |
2" Hex |
RT-20 |
3" Hex |
DT-5 |
2 1/2" Hex |
RT-30 |
4" Square |
DT-15 |
3" Hex |
RT-40 |
130mm Square |
RS-7X |
2" Hex |
RV-70 |
150mm Square |
RS-7 |
2" Hex |
RV-100 |
177mm Square |
RS-12 |
2 1/2" Hex |
RV-140 |
177mm Square |
RT-9 |
2 1/2" Hex |
RV-200 |
200mm Square |
|
|
|
Features
- Converts RS-7X Planetary Drive to RS-7 Planetary Drive.
- With bail kit and mount the RS-7X drive can be used with skid steer, also will work with mini excavator and mini digger derricks.
Accessories - RS-7X Bail Assembly
- Bail Assembly Kit for RS-7
|
Features
- For use with MS-100 and MS-125 Planetary Drives.
- Convert single-swivel units into double-swivel units.
Accessories - Swivel Bracket
|
TruLink™ Pin
TruLink™ Pin - Torque is measured at two points within the connection pin located between the anchor drive attachment and the prime mover.
The TruLink™ pin simply replaces the OEM pin, ensuring that no additional weight or height is added to the installation equipment.

|
|
|
Replaces Connection Pin - No added weight, height, or loss of stroke.
Built-in Inclinometer allows operator to maintain a constant angle of insertion.
All data is recorded within the display - No laptop required to extract data.
Downward (perpendicular) force is omitted with patent pending technology - Isolating Torque Values.
Strain Gage Technology - Not "inferred" or calculated as with hydraulic systems.
Hard Wired Connection - Eliminates interference and signal issues encountered with wireless systems.
Ability to chart and record depth for each pile. |
TruLink Torque Monitor™
A revolutionary new approach to collecting installation
data associated with helical pier projects.
The TruLink™ Torque Monitor system offers true torque readings that deliver a high degree of accuracy (+/1 2%) while providing the operator with real time data. TruLink™ records actual torque being applied to the helical pile, the installation angle, and the depth. Unlike other torque monitoring systems available, TruLink isolates torque values only. Downward and side load forces are omitted, ensuring the data is clean.
|
4" or 8" easy-to-read touch screen display.
Displays time/date, torque, depth, and pile number.
Easily mounts inside operator's cab.
ip67 Display Housing - Rugged, weatherproof, and shock-resistant.
Simple Power Supply - Adapter uses auxiliary power port, cigarette lighter. |
Description |
Screen Size |
Pin Diameter |
Max. Torque
(ft/lb) |
TL4-C1 |
4" |
45mm |
22,500 |
TL4-C2 |
4" |
75mm |
69,126 |
TL8-C1 |
8" |
45mm |
22,500 |
TL8-C2 |
8" |
75mm |
69,126 |
TL8-C3 |
8" |
3.967" |
110,418 |
TL8-C4 |
8" |
4.5" |
211,790 |
Drive Mounts - Universal Skid Loader Mount
Skid Loader Mount Attachment Plate - Attachment Plate connects to the mounting plate on the front of the Skid Loader. The Link Arm connects to both the Attachment Plate and the Drive Unit with the supplied connection pins.
Long Reach Universal Skid Mount
Mount shown with DS-2 Drive
|
Universal Skid Mount - Standard
Mount shown with DS-2 Drive
|
Drive Mounts / Backhoe Loader/Excavator Mount |
End of Boom Mount
Excavator/Backhoe End of Boom Mount
Mounting Bracket connects directly to the boom with the customer-supplied connection pin. The Drive Unit connects to the Mounting Bracket with the supplied connection pin. |
 |
Quick Coupler Mount
Excavator/Backhoe Quick Coupler Mount
Mounting Bracket connects to the quick coupler when the jaws of the quick coupler engage the pins on the Mounting Bracket. The Link Arm connects to both the Mounting Bracket and the Drive Unit with the supplied connection pins. |
 |
Drive Mounts - Examples
Skid Loader Mounting System
- Provides maximum ground clearance of 7' to 11' depending on model selected.
- Increases height capability so drillers can use longer auger bits and anchor installers can use longer sections.
- Unique design optimizes the operator's visibility by positioning the Drive up to 48" from the front of the skid loader.
- Standard retractable stabilizer arms allow the Drive attachment to stand upright when not in use. Improves ability to store, transport, and attach to the skid loader.
- Designed to be used with up to a 12,000 ft/lb Drive.
|
Long reach skid mount used to install helical anchors. |
Excavator quick coupler mount used with
DT-15 drive and auger. |
Excavator Mounting System
- Complete mounting system for all sizes of excavators.
- Mounts can mount directly to the boom or be designed to work with an existing quick coupler.
- Excavator mounts allow for maximum movement to ensure the Drive always hangs true to the ground.
- Custom mounts can be designed for specific applications.
- Mounts are available for the entire range of Drives offered by the manufacturer.

|
Excavation Augers / Quick Change System
Flight Bodies / 5' 10', or 20' lengths
16", 18", 20", 24", 30", 36", 42", 48" diameter (same sizes available in all Options below)

No need to carry two augers, use one Quick Change flight body
with multiple interchangeable heads.
Option 1
Carbide and Dirt Heads |
Option 2
Spiral Rock Heads |
Option 3
Rock Ripper® Heads |
 |
|
|
Parts - Available Teeth and Holders
- 2070 Dirt Fas-N-Lok™
- 1076 Carbide
- 2077 Carbide Fas-N-Lok™
- 2078 Carbide Gage
- 2079 Carbide Fas-N-Lok™
- 604-C Carbide-Faced Tooth
- SR100 Strata Conical Tooth
- P30 Bullet Tooth Holder
- 1604 Holder
Parts - Available Pilot Bits and Holders
- TF-1000 Triflow Pilot Bit
- P-6000 Carbide Pilot Bit
- C31HD Pilot Bit Assembly
Pilot Bit Assemblies include pilot, nuts, bolts,
and teeth if applicable.
|
Take Your Drilling to New Depths with STRATA Drilling Grade Carbide Teeth!
The improved grade of carbide in all STRATA teeth increases the life cycle of the tooth, meaning less down time and increased productivity!

|
|